Changelog
CHANGELOG
We ship every week. This page lists the changes you'd actually notice in the product. Newest first.
If you want this in your inbox, follow @CanShipApp on X. Roadmap items appear in the changelog when they ship, not when they're planned.
Week of 2026-11-09 to 2026-11-15
New
Shipping documents on a receipt. A receipt now has a Documents section. Upload a packing list, bill of lading or photo (PDFs and photos, up to 10 MB each), open it later, or remove it. It works in any receipt status, since paperwork often arrives after the count. Staff only.
A Shopify order's note comes into CanShip. A note like "Leave at side door" written on the order in Shopify now arrives on the CanShip order, marked From Shopify. It stays in step when the store edits or clears it, and the Packing Station shows it as "Note from Shopify". Your client sees it on their own order.
Changed
The Shipments report counts ship dates in your company's time zone. The report and both exports now pick labels by their ship date, so a file never holds a ship date outside the dates you asked for, and it is the same whoever exports it. A line under the dates names the time zone.
Arrival estimates count carrier working days when a parcel leaves on a later day. Past your cutoff, or before a day off, the carrier's transit is now counted in its working days from the day the parcel leaves. No estimate falls on a weekend, and a late service is not shown as in time.
Release Bin asks first when the tote still holds units. It names the tote and how many units are not packed or shipped, and says to put them back or pack them first. Cancel changes nothing.
Archived warehouses no longer count against your plan. Billing counts only the warehouses you use. Restoring an archived warehouse meets your plan's limit, the same as adding one.
Search "#102" to find order #102. Typing an order number with its "#" into the Orders or Shipments search now finds that order.
The ship-late question says when a phone number would make the date. When services that arrive in time are held back only because the order has no delivery phone, the question says how many would arrive in time, names the soonest one you can buy now, and offers Add phone number.
A multi-line move over a bin's stock can't be pressed. The Move button greys while any line asks for more than its bin holds, as Single product does. If the count changed under you, the refusal names the line, SKU and bin.
Fixed
Scanning a bin picks that bin. Scanning "B1" no longer picks a longer label like 01-AA-01-B1 that happens to sort first. The exact label wins on every bin picker. Country and province fields work the same way: typing "CA" commits Canada.
An order whose rest was closed is no longer offered for packing. The order window drops Pack this order for it, and the Packing Station says the rest is closed and how to reopen it.
A short order allocated again reads Short. An order whose only line was reported missing at pick, then allocated again, now reads Short until a new pick job picks it, instead of Picked.
List counts keep up with fast typing. Typing a whole new search quickly on a list no longer leaves an earlier count in the footer.
Week of 2026-11-02 to 2026-11-08
New
Split an order however you choose. An order's menu has Split order, which lists each line and how many of it can move to a new order. Both orders say a split was chosen.
Set a postage price for each client. In Edit Client, set a flat amount per label, a percentage, or both, with a worked example of the result. Each label records what it bills the client beside what it cost, fixed at the moment it was bought, so a later price change never rewrites a label. The Rate Browser shows you the client's price under each cost.
Let a client price its own parcels. Turn on Can rate shop for a client's login under Users. That client then gets the Rate Browser and sees each service at its postage price with the delivery time. It never sees your carrier cost, and you can hide carrier and service names from it.
Price a parcel from any address. The Rate Browser's Ship from now offers Another address after your warehouses, so you can quote from a street, city and postal code you type.
Receiving suggests the overstock bin first. New Receipt, Quick Receive and mobile receiving pre-select the Overstock bin that already holds the product, so new stock goes behind the older stock. A product with no overstock is suggested its bin, as before. A not-sellable bin such as Damaged is never suggested.
Write off stock in a not-sellable bin. Adjust > Remove now takes stock out of a Damaged or quarantine bin, up to what the bin holds less anything allocated or on hold there.
Changed
Quick Receive keeps the client and warehouse for the next item. Receiving several products off one truck no longer means choosing them again each time. Its Location field takes typing and scanning, like the other bin pickers.
When nothing can arrive by the promised date, Recommended is the soonest. The Packing Station recommends the service with the fewest days late, and the cheaper one when two tie, so the badge and the ship-late question name the same service.
Rate lists only show services that serve the lane. Canpar International is no longer offered within Canada, and Canpar USA only for parcels to the United States.
Voiding a Canada Post label on a sent manifest says it is a refund request. The question now says the label can't be voided, and that Canada Post is asked for a refund and credits it once the label is confirmed unused.
End of Day History marks test manifests. A manifest whose labels were made on a carrier's test account carries a Test account chip, saying nothing was tendered or billed.
The lot expiry policy saves when you change it. It no longer waits for the Save bar at the bottom of Company settings, and says what it saved.
Removing a photo from a return or receipt asks first. A photo can be the evidence for a carrier claim, so the bin now asks before deleting it.
Fixed
A Partly Shipped order's step bar waits for the rest. Label stays open until every unit has shipped, and a voided shipment no longer counts toward the bar.
On a narrow window the header keeps the company name. The company you are working in stays readable; your account shows as an icon with the email in its menu.
Week of 2026-10-26 to 2026-11-01
New
FedEx labels on your own account. FedEx approved CanShip as an integrator for Canada, the US and Latin America. Connect your FedEx account and ship on it. Labels come as a 4x6 page by default, or letter size for a desk printer.
Case packs with their own SKU and barcode. Edit Product's Standard pack lists each pack level with its eaches, SKU and barcode. A store order for the case SKU comes in as the right number of eaches. Scanning a case's barcode counts all its eaches wherever you scan. The picker shows a case as a case ("Take 1 Case pack (16) + 3 eaches"), and the packing slip says what was ordered at the case level.
Clients can enter their own orders. Turn on Can create orders for a client's login under Users. That client can then place orders from its own products, and they land Open for you to pick and ship. The client can change or cancel an order while it is Open. A client gets an email when you give it access or ordering.
Print every packing slip in one press. An order with two or more boxes has Print all packing slips, in the order window and at the Packing Station's Order Complete: one window, one page per box, numbered. Each slip lists the lots in its own box.
Resend an invitation. A login nobody has signed into yet reads Invited on Users, and its menu offers Resend invitation.
Pick a large quantity in one step. In the picker, tap a product's count to type how many you picked, or press Pick the rest and confirm the number.
Choose which orders a backfill imports. Every order in the backfill preview has a tick box, and only the ticked orders come in.
A merchant's Request fulfillment note reaches CanShip. A note like "gift, no invoice" sent with Request fulfillment in Shopify now shows with the order's import notes.
Changed
Home deliveries are priced as home deliveries. Every carrier that prices residential delivery is now told which it is: an address with a company name is a business, one without is a home, unless the order or the Rate Browser says otherwise. Some quotes change: UPS adds its residential surcharge to home deliveries, and so does Canpar where your account carries one. The Rate Browser says which way it priced.
Rate lists leave off services for another country. A service whose own code serves a different lane is no longer listed, on the Packing Station or the Rate Browser.
The Packing Station says when a parcel can leave, and why. When that isn't today, the rate step says so above the list, for example "This parcel can leave Fri, Oct 30: today is past the 9:00 AM cutoff and Thursday is not a shipping day."
The Orders list shows when the store holds an order. An order on hold in Shopify reads "On hold in store", with the reason on hover, and Mark Ready says why it is unavailable.
New Order's Add product takes a scan. Scan or type a barcode or SKU and press Enter to add the line. A second scan adds another unit.
Archiving a product says what it still holds. The Archive window names the units, bins and open orders the product still has. Delete moved into Edit Product, offered only when nothing uses the product.
Fixed
A reconnected Shopify store no longer stays paused. A store waiting for Set up now waits instead of pausing its stock updates, and a paused store says so on its Channels chip and Settings page, with the reason and a Resume button.
A store can cancel the unshipped rest of a partly shipped order. A cancellation request for units still on the shelf is now accepted once the shipped boxes have been reported to Shopify.
Week of 2026-10-19 to 2026-10-25
New
Void a label and keep the box packed. Void Label now offers two choices and says what each does before anything happens. Relabel keeps the box packed with its stock and opens Rate & Ship to buy a new label for that same box. Void and unpack works as a void always did, putting the stock back on the order to be packed again.
Bring back a disconnected Shopify store as the same channel. Channels now lists disconnected stores with their client, when they left and what they still keep, each with Reconnect and Get install link. Reconnecting restores the same channel, so its orders push to Shopify again and its products stay linked. New Channel for a store the client had before reconnects that channel instead of making a second one.
Move a Shopify store to another client. A store connected under the wrong client can now be moved from its settings menu on Channels. The channel, its orders and its products (with their lots and stock) move together, while receipts, returns and pick jobs stay with the first client as history. The dialog says what moves, what stays, and anything that has to finish first.
The detailed receipts export counts boxes and skids. Each receipt now carries how many boxes and pallets it came in on, with single-SKU and mixed pallets counted separately, so adding up a column gives the period's total. Counts are fixed when a receipt is confirmed. Receipts from before 2026-09-22 recorded no boxes.
Changed
Common buttons show an icon beside their word, the same icon everywhere. Save, Cancel, Print, Export, Archive, Restore and the other common actions each carry one icon on every page, and menu items are words only. A few buttons now name their action, for example "Print packing slip".
The packing slip prints on a 4x6 label printer as well as Letter. It takes the paper of whichever printer you pick: a compact black layout on a 4x6 thermal label, and the same Letter page as before. A long box runs on to further labels with the column headings repeated.
Archiving a client disconnects what links it to outside systems. Its products let go of the store listings they held, so the store can be connected and synced under another client. The archive waits while a label on the client's own carrier account is waiting for End of Day, or an external warehouse still holds one of its orders, and says what ends the wait. Restoring the client brings back the client only, so its stores and accounts are reconnected after.
One Ship button on Rate & Ship, and a customs Save button you can find. The Ship button at the bottom of the rate list steps aside while the one under your chosen rate is on screen. At the packing station each customs line now saves through a button labelled Save, filled in when that line has a change waiting.
The Audit Trail says Moved for a move between bins. Both rows of a move used to read Added and Adjusted. They now read Moved, on the page and in the export.
Fixed
End of Day closes labels bought on a client's own carrier account. Those labels never appeared at End of Day, so they could never go on a manifest, and for Canada Post the parcels were never sent to Canada Post from CanShip. Each client account now has its own group under the carrier, and Close sends that account's manifest on that account.
Removing a carrier from a client no longer strands its waiting labels. Unassigning used to delete the client's own account for that carrier, leaving any label not yet voided or manifested with no account to void or close it. Such an account is now kept and switched off, and the Carriers page says which.
A refused save says why, and what to do. Connecting a Shopify store another client already holds said "A channel with that name already exists." It now names the client that holds the store and the ways out. The same goes for renaming a locked channel, reusing an archived client's name, reusing a retired bin's name, and adding another client's product to a receipt.
Removing CanShip's location from a Shopify store no longer moves its stock into the store's own locations. Disconnecting a store, or unticking a warehouse in its setup, could let Shopify move the stock CanShip showed there into another of the store's locations. That location then showed units it did not hold, and orders went there instead of to CanShip. The stock now goes with the location, and the setup warning and the Disconnect question say so.
A carrier's refusal of a void says it is the carrier's. A refused void now reads, for example, "Canpar refused the void: Cannot find shipment.", so it is clear the words are the carrier's. At the packing station, the void question for a test label now says it was made on the carrier's test environment, as Shipments and End of Day already did. On End of Day the Void column stays in view at the right edge of the table.
A tote packed in full no longer shows as waiting to be packed. A tote whose every unit is in a saved pack was listed under both Available Bins and Packed, Not Shipped. It now shows under Packed, Not Shipped only, and the Dashboard's bins to pack no longer counts it.
A Canpar refusal shows each message once. Canpar repeats its messages, so a refusal read the same sentence twice. Each distinct message now shows once, at rates, labels, voids and End of Day.
Week of 2026-10-12 to 2026-10-18
New
Finish a Partly Shipped order: mark the rest shipped, or close it. Mark as Shipped is now offered on a Partly Shipped order once what's left is fully allocated. When the rest will never ship, Close the rest asks first, takes an optional reason, returns any allocated stock and marks the order Shipped without telling the store. Reopen the rest undoes it.
Labels can carry your client's name as the sender. Each client's labels now show the client's own business name at your warehouse address, on the same carrier accounts. A client has a Name on labels field for a trading name, and the form warns as you type when a name is longer than a carrier's label can print. UniUni labels keep your carrier account's name, since UniUni takes no sender name.
Cancel an order from its own window. The order's window now has Cancel Order at the foot, offered and greyed exactly as the row's menu is. Cancelled orders also get their row menu back, with Reopen Order, Duplicate Order and Edit Order.
Extensiv: send Integration Manager the products it doesn't have yet. A channel setting, off unless you turn it on, sends the products Integration Manager doesn't list so that it creates them. Only an Integration Manager admin can remove one afterwards. After any Sync Inventory, See all lists every SKU Integration Manager does not list, with Copy for a spreadsheet.
Product import and export carry every field a product has. The file now includes lot tracking, ships in its own container, home locations per warehouse, the regulated-goods flags, the US HS code, the manufacturer, tags and a client column. An import changes only what a row says: a missing column or a blank cell leaves that field as it is, where it used to clear it.
See each product's home location, and hear when a home bin runs empty. The Products list has a Home location column. When a home bin is empty and the same warehouse has free stock of that product elsewhere, the bell says where, and the line closes by itself once the home bin is refilled.
The Returns list shows carrier and tracking number. A tracking number links to the carrier's tracking page where CanShip knows it, and returns can be searched by all or part of a tracking number.
Changed
Automatic allocation takes the oldest stock first. After expiry dates for lot-tracked products, Allocate Inventory, New Order and imported orders now take the stock received earliest, across bins. Before, they followed bin sort order. The lot expiry setting's Off option now says the same.
Canada Post connects one way: sign in, or a Developer Portal key. The older username and password connection from Canada Post's retired developer program is gone from Settings > Carriers. An account still holding only those details says so where it is used and asks you to reconnect. Labels and End of Day documents made through the old connection can no longer be opened from CanShip.
The Audit Trail names receipts by their name and says which box or skid each change was. A receipt reads as the Receipts page names it instead of an internal number, and a new Box / Skid column sits beside Lot, in the export too. Box and skid are recorded from 2026-10-14 on.
Dropdowns read A to Z. Carriers, clients, warehouses, channels, bins, countries and the rest sort alphabetically, with numbers in number order. Lists whose order means something, like statuses, keep it.
The packing station checks customs weights before showing rates. If a parcel's customs lines weigh more than the parcel, the panel says so in your units and rates wait, instead of the refusal arriving at Ship.
Fixed
Packing more than one box is steadier. While the next box is being chosen the station takes no scans, and removing the box being packed goes back to the one before it. Back from the Weight step keeps the weight you typed, and the parcel's card shows it straight away.
A bin holding boxes is counted as a whole. Allocating by hand and the receiving bin suggestion now add up everything in the bin, loose units and boxes alike, where they used to read a single box.
Scanning in a product field picks the right product. A second scan starts a new search instead of being typed onto the first product, and a code that matches nothing clears the field instead of leaving the last product chosen.
Smaller fixes. Clear now removes a Deliver by date from an order. An archived warehouse's bins leave the bin pickers with it. Shipments can be filtered to Shipped, and Label Created lists only parcels with a carrier label.
Week of 2026-10-05 to 2026-10-11
New
A notification bell tells the warehouse what happened while nobody was looking. Admins and staff have a bell in the header for things that need doing: stock put on hold by a Can't Find, a label a carrier charged for that wasn't saved, a store that wasn't told an order shipped, an End of Day the carrier refused, an order the store cancelled or changed after its label was bought, a store whose stock sync stopped, and more. A line closes by itself when the thing is fixed, not when someone reads it. On a phone the count shows on the account icon, and a Notifications page holds the whole list.
A Can't Find puts that SKU's stock in the bin on hold until the bin is counted. The next order is no longer sent to the same shelf, and a connected store stops selling those units. A Cycle count adjustment, or Counted on Locations, releases the hold and applies the count, even when the count finds fewer units.
Reopen a cancelled order, and record why it was cancelled. The Cancel question has an optional reason, shown on the cancelled order with who cancelled it and when, and a reason the store gives is recorded too. Reopen Order puts the order back to Open with its number, store link, notes and tags, and nothing allocated. Orders the store cancelled, orders cancelled at an external warehouse, and orders cancelled before this change can't be reopened, and say why.
Receive a return with no order, or for an order CanShip didn't ship. New Return has a button for goods CanShip has no order for: choose the client and warehouse, add a reference if there is one, and scan or type each unit as it comes out of the box. An order CanShip holds but didn't ship can now be returned too, up to what was ordered.
Partly Shipped orders. An order with some units labelled and some still in the building now reads Partly Shipped and stays on the Active tab until the last unit is labelled. Its window shows what is still to pack, with a Pack this order button, and the packing station lists every parcel already labelled.
See boxes and skids in Inventory and at the picker. Inventory has a Unit column (Loose, Box, Skid, and whether a box is opened), on screen and in the export. The picker says which unit to take from first, loose units before opening a box.
Changed
Labels open ready to print. The shipping label now opens in its own label-sized window with the printer dialog up, the way the packing slip does, at the packing station, from the order and from Shipments. ZPL labels are still saved as a file for the thermal printer.
The packing slip says when an order ships in more than one box. A slip for a box that isn't the whole order ends "This order ships in more than one box.", so the customer doesn't read the order as short. Hovering Packing slip shows how many times one was printed, and by whom.
Reports use your own days, and Dashboard numbers open exactly what they count. Report periods now start and end at midnight in your time zone instead of UTC, and several report figures now match their pages. Each Dashboard number opens the rows it counted, with a filter chip you can clear, and the Orders Sitting panel shows real figures again.
Test labels are marked wherever labels are counted. End of Day, the Shipments export and the Shipments Report now say which labels were made on a carrier's test account, which the carrier never charges for. A label from any carrier's test account carries the Test label mark, and the Rate browser marks test prices in every view.
The Rate browser says when its prices are out of date. Change the form after pricing and a warning names what changed and dims the old results. Fastest first now orders same-day services by their committed hour, and a rate that can't be bought is marked with the reason.
Shopify store setup and disconnect are clearer. A store's card on Channels lists both steps left to do in Shopify, for either of Shopify's shipping layouts, each with a button to the right page. Disconnecting a store now also removes CanShip's webhooks from it, and the Disconnect question says what happens.
Fixed
Canada Post services to the United States are offered correctly. Canada Post's US services through ShipStation were wrongly marked "Serves Canada only" and left out of the recommendation, so a dearer service could be recommended. Canada Post rates to the US are now marked when the account has no US duty prepayment set up, and Canada Post is no longer asked to price parcels to countries it doesn't ship to.
A bin holding boxes behaves as one bin. Adjust > Remove, Move and the bin lists work on the bin's total, and voiding a receipt takes a boxed line out of its own box. Saving an open receipt no longer turns its boxes and skids back into loose lines.
Sync Products no longer wipes a value the store leaves blank. When a listing has no weight, barcode or name in the store, CanShip keeps its own. Unticking a field now updates the preview at once.
Week of 2026-09-28 to 2026-10-04
New
Try Canada Post on its test environment before shipping for real. Accounts connected by signing in to Canada Post can switch between Production and Test under Configure. On Test, rates and labels are samples, nothing is billed, every rate is tagged "Test account", and a label opens as a CanShip test page marked not valid for shipping. Test labels are never included in End of Day.
Archiving a client walks you through offboarding. The Archive dialog shows what the client still has in the warehouse and asks what to do with each: stock, open orders, open receipts, a connected store and customer logins. Nothing is archived until every line has an answer. Two adjustment reasons come with it: Returned to client and Disposed.
Give a product a home bin. Edit Product has a Home location field for each warehouse, and a bin's edit dialog shows the products that belong in it. Receiving and returns suggest the home bin first, and returns now go back to a pickable bin rather than to overstock.
Returns are scanned as they are unpacked. Only scanned units count as received, with + and - for a unit that won't scan. Each item can carry its own notes, the inbound tracking has a carrier, and there is a new Undeliverable reason.
Changed
Orders are named by the number people know, everywhere. Screens, exports and carrier labels now show the store's order number, or your CanShip order number, and never CanShip's internal record number. A split order takes its parent's number, for example "#27-1".
End of Day sends Canada Post one manifest per warehouse. Each label remembers the warehouse it was created from, and End of Day sends one manifest per shipping point, from its own address. Before, a company shipping from two warehouses had both on one manifest under one address, and Canada Post re-priced the parcels.
Canada Post labels record Canada Post's own price. CanShip now asks Canada Post for each label's price, so the Shipments page and End of Day show what Canada Post priced it at rather than the rate-shop quote.
Companies on one Canada Post account share the sign-in. Canada Post keeps one live sign-in per merchant, so a second CanShip company signing in to the same account used to switch off the first. A sign-in now refreshes every company on that customer number while each company's End of Day stays separate. A sign-in Canada Post refuses shows on the Carriers card, with a prompt to sign in again.
A Shopify store belongs to one client. Connecting or syncing a store under a second client used to report success and leave the new client with nothing. Sync Products now names the client that owns a listing and what to do, and connecting a store another client holds is refused up front.
Carrier errors say what to do. A carrier failure names the carrier and the next step instead of "Unhandled error", a refusal quotes the carrier's own words, and the error banner has a Retry button. If no carrier returned a rate because of a timeout or a dropped connection, CanShip asks once more by itself.
Fixed
Searching Products works again. Since September 23, any search on the Products page failed with an error. It returns results again, with exact SKU and barcode matches first.
Canada Post labels on account buy again. From 2026-09-28, accounts that settle on account through a Canada Post Developer Portal connection were refused at label time. Labels buy again. Pay-per-label accounts were never affected.
A voided label keeps its tracking number on screen. The carrier and tracking number stay on Shipment Details, struck through and marked voided, with a copy button. Searching Shipments by a voided tracking number finds the shipment.
Delivery dates read right. A quote taken on a weekend no longer has the weekend counted twice, and a carrier date already in the past is no longer marked "In time".
A fulfilment push to a store that uninstalled CanShip says so. Integrations Health now says the store uninstalled CanShip and to reinstall it, instead of an error code and a page of raw text, and the row can be dismissed.
Week of 2026-09-21 to 2026-09-27
New
Set and review the customs declaration before you ship. Company Settings has Customs declaration defaults: what the goods are for, terms of sale, who pays duties and shipping, the export declaration and the importer of record. At the packing station a shipment to another country shows its whole declaration before Ship, with Edit to change it for that shipment. When the label would be refused, Ship is turned off and the reason is shown.
CanShip generates customs documents. A cross-border shipment offers a commercial invoice, and a Canada Post label the CN22 or CN23, from Shipment Details and the packing station's last step. Every figure comes from the declaration the label was bought with.
Receive in boxes and on skids. The receipt page can group lines into a box or onto a skid, or make them loose, and mobile receiving takes a skid label before the product scans. Adding the same SKU to the same bin twice now keeps two lines, so boxes can be counted. When stock comes out of a bin, loose units go first, then an opened box, then a sealed one.
Mark an order shipped when a 3PL shipped it. An order an outside warehouse holds can be marked Shipped by the 3PL, with or without a tracking number, and the store is told. Mark as Shipped also has a Service field, which shows on Shipments and in exports.
Stock levels reach Integration Manager on a schedule. Each Extensiv channel has a switch to send stock levels on a cadence, every 15 minutes by default, and the channel row shows the last run. Sync Inventory also works again: Integration Manager had been accepting none of the products CanShip sent.
Take a picked order back. Remove from pick job now un-picks the order: its tote is released, its units read as back on the shelf, and it keeps its allocation. Cancelling a picked order releases its tote too, and the message says which bin the units go back to.
A Can't Find at pick does something. Reporting a unit missing releases its allocation so the order reads Short, flags the bin for a count, and tells the packing station not to expect that line in the tote.
An admin can move an order a 3PL is holding. After a warning that names the warehouse and its reference, and says CanShip does not tell them, an admin can re-assign the order. Staff are told to ask an admin.
Changed
A label's cost is what the carrier charged, when the carrier says. Canada Post, Canpar, ShipStation and Stallion state a price on the label they sell, and that is now the label's cost in End of Day, the shipments report and the grid, with the quote kept beside it.
UPS needs a delivery phone, and the rate step says so before Buy. A UPS rate on an order with no phone number is marked and can't be bought.
A Shopify address or phone change applies until a label is bought. It used to be refused once an order was picked or packed. An order with a live label, or held by a 3PL, still keeps its address, and the change is recorded.
Cross-border Canpar and Stallion parcels are checked before Buy. Canpar rates on a lane leaving Canada are marked "Can't declare customs" and refused at Buy, because CanShip can't send Canpar a customs declaration. A Stallion parcel to the US is refused in words before any call when a line lacks its US HS code, origin or value, or carries one of the new regulated-goods flags.
Fixed
Canada Post works again for accounts connected by signing in. Signed-in accounts failed Test Connection and could not rate or ship. They work again, and a Canada Post refusal now says what was refused instead of a bare status.
Voiding a Canada Post label already on a transmitted manifest asks for the refund. Canada Post won't void a label it has been handed, so Void Label now makes the refund request and says Canada Post credits it once the label is confirmed unused.
Allocation no longer under-counts a bin holding a box and loose units. Such a bin read short, and an order could sit unallocated with stock on the shelf.
The packing slip prints cleanly and carries the right date. It no longer prints the browser's header and footer, and its date reads "Printed" in the warehouse's day.
Week of 2026-09-14 to 2026-09-20
New
Connect Canada Post by signing in. Carriers > Canada Post has a Connect Canada Post button that signs you in at Canada Post and brings your API credentials back, so nothing is typed. Canada Post's own onboarding may ask you to choose and pay for something before it issues credentials; that step is Canada Post's, not CanShip's. Typing credentials by hand still works.
Find out why a store order isn't in CanShip. Integrations Health has a Find an order box: type the store's order number and it says whether CanShip imported it, skipped it and why, failed on it, or never received it, with Import anyway where that applies. An Orders search that finds nothing links to it.
Changes made in Shopify after import are caught. An order put on hold in Shopify is on hold in CanShip until the store releases it, and an order fulfilled in Shopify shows as Shipped elsewhere and releases its stock. An order whose items changed, or that the store moved more of to your location, turns red. A label now fulfils the Shopify order even after the merchant pressed Request fulfillment.
Every label to the US needs a 10-digit US HS code. US customs now requires the full 10-digit tariff code, so a US label is refused until each product has one, whatever the carrier. A product can carry a US HS code beside its general one, set on the product or in the packing station's customs editor. Cross-border labels now carry a full customs declaration from your company's defaults, and the customs panel has Country of origin and accepts HS codes as plain digits.
Small additions to orders and shipments. An order with no warehouse can be given one from its detail, and Shipment Details opens its order. A line whose product has a different name in the store shows the store's name underneath. The shipments export says which warehouse shipped each label, and whether it was a 3PL.
Changed
An order with a SKU CanShip doesn't know can't be marked Ready. A line whose SKU can't be matched, or that has no SKU but needs shipping, blocks Ready and pick jobs and names what to fix. Map it in SKU Mappings, then press Re-check lines.
A new Shopify store sends its stock without a second step, and Shopify's count follows each shipment. Stock sync turns on the first time a new store's CanShip locations are saved, and CanShip sends its count on every change, so Shopify matches within a minute. A new store holds its orders until it has a warehouse, and its card says so.
A carrier that doesn't answer in time no longer dead-ends the pack. For carriers that return the same label on a retry, CanShip tries once more by itself. If it still can't tell whether a label was made, the message says so and what to do, and your pack is kept.
Archived clients stop cluttering the app. Their channels leave the Channels page, and their orders are hidden on Orders behind a Show archived clients toggle.
CanShip is faster. The web app now downloads only the page you open, orders open in fewer round trips, and the first click after a quiet spell no longer waits as long.
Fixed
UniUni labels can be bought. Buying a UniUni label failed because the currency and the declared value were not sent the way UniUni accepts them, and a bought label could then fail to save. All three are fixed.
FleetOptics returns rates again. An address saved with a trailing slash broke the rate request. Buying labels was never affected.
Product pickers search your whole catalogue. On receipts, Quick Receive and order lines they only searched a client's first 50 products. Receipts also accept barcode scans now.
Carrier logos and tracking links follow the actual carrier. A UPS shipment could show Canada Post's logo and open Canada Post's tracking page.
A voided label's tracking is never sent to the store. Retrying a failed store update after its label was voided used to mark the order fulfilled with the voided tracking number. Voiding now cancels any update that hadn't gone through.
Week of 2026-09-07 to 2026-09-13
New
Set up routing rules for each client. Each client has a Routing rules page, reached from Clients, with rules that match on country, province or state, and the start of a postal code, checked in order. A rule applies only when its warehouse can fill the whole order, otherwise the next rule is tried, and an order no rule can place waits for a person under a new Waiting to be placed filter. A store can have its own rules, checked before the client's.
Tag and note orders, and filter by more than status. Staff can tag orders with their own labels, Shopify store tags arrive with each order, and notes on an order are threaded and can be internal or visible to the client, who can reply. Shipments, products, receipts, returns, clients and warehouses have the same tags and notes. Orders can be filtered by ordered date, destination country, carrier and tag.
Connect UPS by signing in. Carriers has a Connect UPS button: sign in at ups.com, approve, and you're back, with no developer app to register. You still enter your UPS account number and ship-from address, which UPS doesn't hand back.
Connect Canada Post with a Developer Portal key, with or without a contract. A Canada Post card can take a key from Canada Post's new Developer Portal. Without a contract, each label is paid when it's created and kept out of End of Day, and a void becomes Canada Post's refund request.
Products have a customs value and a customs description. When set, the customs value (in its own currency) is declared instead of the retail price, and the customs description (up to 45 characters) instead of the listing title. Both are on the product form and the CSV import, and the description is in the packing station's customs editor too.
Fix a refused address without leaving the packing bench. When a carrier rejects the ship-to at rate time, the address can be edited where the refusal appears, and saving re-prices. A corrected address from the carrier is shown for you to read, never applied silently.
Void a label the carrier charged for but CanShip couldn't save. These labels are listed on the order, at the packing station and at End of Day, each with a Void label button.
Send a store owner an install link. Each Shopify store's settings menu has Get install link, so the owner can install and approve the connection without a CanShip login. Connecting no longer takes over your CanShip tab.
Your account: your name, a password change, a home company and row height. Set your first and last name in My Settings, and change your password from Account Security. Anyone in more than one company picks which one loads at sign-in, and a Row density choice applies to every table.
Every stock adjustment records why. Adjust asks for a reason (Cycle count, Damaged, Lost, Found, Sample, Received outside CanShip, or Other with a note), and the Audit Trail shows it.
Changed
Re-assigning an order shows which warehouses have the stock. Single and bulk re-assign now share one dialog that says whether each warehouse can fill the order, marks third-party warehouses, and asks before handing orders to one. An order is never sent to a third-party warehouse unless a routing rule names it.
Rates come only from carriers you've connected. Carriers you never set up no longer show errors beside your real rates or slow the quote down.
Available means stock that can be promised. Stock in a not-sellable bin no longer counts as Available on Inventory or in its export. On-hand is unchanged.
Passwords expire after a year. A password a year old is retired at sign-in, and you choose a new one through the usual emailed code. The clock started the day this shipped. The account email new users get now carries CanShip's look.
Fixed
Orders can now reach a third-party warehouse at all. Automatic routing could never send an order to a 3PL, whatever stock they were holding. Two correct rules collided: stock at a third party is recorded as not pickable, because nobody at your own sites picks it, and a separate change had made the availability check count only pickable stock. Every third-party warehouse therefore looked empty to the router, and every order aimed at one was held for a person to place by hand. Nothing failed visibly, because a held order looks the same whether no rule could be satisfied or no rule existed. Availability at a third party is now simply what they are holding. Your own warehouses are unchanged.
Orders sent to a 3PL now actually reach it, and the Orders page stops claiming they have. Assigning an order to an external warehouse could mark it as sent without it arriving, so the screen and the warehouse disagreed and only the warehouse was right.
A 3PL sees the store's order number, not ours. Orders sent to a third-party warehouse arrived showing a CanShip number in the field their staff actually read, so a warehouse worker, a packing slip and a support ticket all quoted a number the merchant and the end customer had never seen.
Retrying a Stallion label after fixing the problem now works. A retry repeated the original refusal instead of asking again with the corrected details.
Integrations Health reads properly when there is only one of something. "1 new listing need review" now says "needs".
A voided shipment is kept as a record, and its box can be packed again. Re-scanning an order no longer deletes a voided shipment and its history, and voiding one box of a multi-box order frees its units to be packed again.
Smaller fixes. US ZIP+4 addresses get Canada Post and Stallion rates, setting a Deliver by date by hand works on routed orders, and UniUni rates appear in the rate shop. Stallion ships from the order's warehouse, and allocating a partly shipped order no longer reserves stock for units already sent. The header client filter no longer vanishes, and now applies to Bins, Returns, Carriers and the Clients page.
Week of 2026-08-31 to 2026-09-06
New
Retire a bin you no longer use. A bin can now be taken out of service. Archive takes it out of use so it stops accepting stock and leaves every picker, while it keeps naming itself on every past receipt, movement and audit record. Delete is offered only for a bin nothing has ever been stored in, for one created by mistake. Both are reversible, and CanShip refuses to retire a bin that still holds stock, has allocations against it, has a hold, or has products homed to it, naming whichever condition is in the way.
Say which products belong in a bin, and print the shelf label from CanShip. Shelf labels were made by hand somewhere else. A bin can now be told which products live in it and print its own label.
Send a user a password reset from the Users page. If someone could not get into their account there was no way to help them from inside CanShip.
Scan a SKU, a UPC or a bin when moving stock. Move Inventory had four tabs and only one of them accepted a scanner.
Fixed
Signing out signs you out of every tab. Logging out in one tab left any other open tab still working, for up to an hour, until its access token ran out. On a shared packing terminal that is exactly when it matters: sign out, walk away, and the next person finds a live session in the tab next door.
Delivery promises no longer land on a weekend. The promised date was worked out by adding handling and transit as plain calendar days, so any promise that crossed a weekend landed on it, showing a buyer a Saturday no carrier delivers. Handling now counts in the warehouse's own working days.
Four fixes to the packing station, from a shift on the floor. The Not Packed list counts down as you fill the box instead of up, because a list of what is left should shrink. A failed ship can be retried: after fixing the cause, "Fixed it, re-price" gets fresh rates and ships, instead of repeating the same error.
Picked orders say Picked. Orders that had been through a pick job kept showing as Ready.
The Skipped Imports panel works again. Integrations Health had stopped showing the list of orders a store did not route to CanShip.
An order's import notes no longer hand you raw data to decode. Some orders showed a line of machine output where an explanation belonged.
Week of 2026-08-24 to 2026-08-30
New
UniUni is wired up, and you connect it yourself. CanShip now talks to UniUni's Platform Client API, whose keys you generate from your own UniUni portal in a couple of minutes. The alternative was their Integration API, where UniUni issues credentials by hand after onboarding. UniUni prices now appear on the rate screen alongside every other carrier.
Retire a warehouse you no longer use. A closed building stayed in every picker forever, offered as somewhere to receive into, move stock to and ship from. Warehouses can now be archived: they leave every picker and refuse new stock.
Remove a client from an external warehouse. A client could be added to a third-party warehouse and never taken off again. The only way out was switching the whole warehouse back to CanShip fulfilment, which disconnects every client at that building.
Print a receiving label for what you just put away. A confirmed receipt now prints a 6x4 label per line received, so the stock on the shelf identifies itself without anyone opening a screen.
Set a delivery promise on an order by hand. Until now the only way an order could carry a promised delivery date was for a store to send one, or for a channel's shipping speeds to interpret one at import. A phone order could never have one.
Export what you are looking at on Orders. Every other list page could export its rows and Orders could not, so the one page people live in was the one you had to copy by hand. Export CSV now honours whatever filters you have set.
Photograph a return. Returns can now carry photos, the way receipts already could. A damage claim against a carrier, or a client disagreeing about what condition something came back in, is settled by what the parcel looked like.
See which orders have been sitting. An order nobody has looked at for three weeks used to look exactly like one that came in this morning.
Open a shipment from the order it came from. An order's detail listed its shipments and gave you no way to open one. You had to close the window, go to Shipments and search.
Sort the rate sheet by cheapest or fastest. Rates came back in whatever order the carriers answered in, so finding the cheapest meant reading every row.
Ship straight from the rate you picked. The Ship button sat below the whole rate list, so choosing a service near the top meant scrolling past every option you had just rejected, on a touchscreen, holding a box.
Changed
Clients and warehouses are no longer capped or charged for above Starter. Grow was limited to one warehouse and charged a monthly fee per extra client, and Pro was capped at ten clients, which meant Grow could hold more clients than Pro and a 3PL adding a second building had to jump a tier to do it.
Automatic allocation no longer takes stock from bins marked not pickable. Overstock and other non-pickable bins are left alone by automatic allocation, and a person allocates from them by hand when they want to. An order that comes up short because the stock is sitting in one now says so.
Fixed
Saving a pack no longer makes it vanish off the packing station. Clicking Save on a packed container cleared it off the screen and put its items back under Not Packed, as though nothing had happened, while the shipment had in fact saved correctly. Packers reasonably packed the box again.
The pricing page no longer advertises features that do not exist. Three things were listed that we do not have.
Week of 2026-08-17 to 2026-08-23
New
A warehouse can have its own timezone, order cutoff and working days. Set them on the warehouse and the delivery promise is worked out in the building's own clock rather than the company's.
A channel has its own settings page. Click Settings on a channel and you get a page rather than a popover, with every setting saying what it actually does. "Create products for unknown SKUs" now tells you what happens either way.
A channel row says what it is set up to do. It shows only what is unusual, so a row stays quiet unless something about it deserves attention.
The rate step decides for the packer instead of briefing them. The service CanShip picked is badged Recommended, and each row says what it means rather than printing a date to compare: "In time", "3 days late", and beneath it "Arrives in 3 days".
The rate screen says which services actually meet the order's delivery promise. When an order carries a promised date, each quoted service is marked as arriving in time, arriving late, or not having quoted a transit time at all.
Orders say when a requested shipping speed could not become a delivery date. If a store asks for a speed that is not in that channel's mapping, the order still imports and now carries a warning naming the string, so it can be added.
Receiving on a phone has a searchable, scannable bin picker.
Fixed
Saving a channel's shipping speeds works. The dialog was posting to an address that does not exist, so every Save returned an error on every channel, Shopify and Extensiv alike. It had never worked.
Shipping speeds you saved now show up. They were being stored correctly but never sent back to the browser, so the dialog opened empty on a channel that had them and the settings page counted zero.
The warning that your store is routing orders away from CanShip can now appear. It was written correctly and never sent to the browser, so it had never once been shown.
Stock expiring today is no longer treated as expired from late afternoon. Expiry was judged against the database's day, and the database runs on UTC, so from about 17:00 in Vancouver a lot expiring today flipped to expired with nothing having happened to it.
An expired lot says so on the floor, not just in the office. The picker showed a lot's expiry date and turned the chip red, with the word "expired" appearing nowhere, and the packing station showed the date with no signal at all.
The warehouse form names the company timezone it inherits. The field showed a hardcoded "America/Toronto" whatever the company was actually set to.
The packing station stops asking the packer questions they cannot answer.
Week of 2026-08-10 to 2026-08-16
New
Find out why an order was skipped. Importing orders from a store used to report a bare count, "2 skipped", with no way to learn why. The reason was being recorded the whole time and no screen ever asked for it. Each skipped order now appears with its reason and its store order number, and its SKUs are checked against that client's catalogue so any product you do not stock is flagged. Integrations Health gains a Skipped Imports section showing the same thing across every run. Skips are counted separately from errors and never shown in red, because the usual reason an order is skipped is that the store did not route it to CanShip, which is the system working correctly.
Import a skipped order anyway. Next to the reason there is now an Import anyway button. It replays the order CanShip already stored, so nothing is re-fetched from the store, and it overrides one thing only: whether the store routed the order to CanShip. An order it cannot fill is still held. The order is marked as force-imported by the person who did it, and an order that was already imported cannot be forced, so there is no way to create a duplicate. It also reaches orders skipped by a live store update, not just ones a manual import run skipped, and it is available from the Integrations Health list rather than only in the window that produced the skip. A skipped order that later arrived by another route shows as "Imported since" and drops out of the outstanding count instead of sitting there as unfinished work.
Two-factor authentication on admin accounts. Admin sign-in now asks for a second factor. On iPhone the code field offers one-time-code autofill, so you can tap the code in rather than retyping it.
Stallion Express is now a carrier. Connect a Stallion account from the Carriers page with an API token from their dashboard, then rate-shop across every service that account has enabled.
Set a default warehouse for your account. One place to say where orders land when nothing more specific applies.
Clients can be archived. Retire a client without deleting their history.
Amazon stores can connect using the seller's own private app. Sellers who would rather keep the connection inside their own developer account can now do that.
The order window explains what an import did. If stock was short, or a product was created automatically from the order, the order says so instead of leaving you to work it out from the numbers.
Improved
CanShip works on a phone. The header, sidebar, Orders filters, Inventory, Receipts, Warehouses, SKU Mappings, Containers and Warehouse Locations have all been reworked for a small screen. Tapping a text field no longer zooms the page.
Buyer addresses are erased on a retention schedule you set per channel. Shopify privacy requests are actioned automatically.
A shipped order's delivery address can no longer be edited. Once a label exists, the address on it is the record.
Exported timestamps match what is on screen. Report exports write times a spreadsheet can sort, in your own time zone rather than UTC.
Fixed
Shopify orders keep the customer's email address. It was being dropped on import while the phone number came through.
A missing delivery phone number is flagged before you weigh and rate a parcel, rather than at the point of buying the label.
A parcel with no measurements no longer reads as 0 x 0 x 0.
The packing screen says why Confirm and Get Rates is greyed out.
Rate quotes no longer fail with an unexplained error when a carrier is slow to answer.
Voiding a label puts the order's allocations back, not only its stock.
Orders are named by their real order number in the picker, the shipment window and the packing screens.
The picker stops offering pick jobs with nothing in them.
Saving a warehouse works again, and saving a carrier no longer shows a "cannot quote" warning over a save that succeeded.
Week of 2026-08-03 to 2026-08-09
New
Products that ship in their own box. Mark a product as needing no packaging and the label goes on its own retail box.
Pack an order now, ship it later. A packed order can be saved and shipped when you are ready.
Ship in a box that is not one of your standard ones. Enter dimensions for a one-off carton, or send a polybag with no dimensions at all.
CanShip works out product weights and sizes on its own, and dimensions and weight are confirmed at the bench rather than assumed.
Instructions on a pick job. Write them as you create the job.
A store can keep its own inventory and still send you orders. Useful for merchants who are not ready to hand over stock control.
Orders route by where they are going, not only by which cart they came from.
Third-party warehouse support. CanShip can see what a partner warehouse holds, that stock reaches the storefront, shipments come back, and an order the partner is holding cannot be edited or cancelled behind their back.
Print a packing slip for each box, reachable from the order rather than only from the packing station.
Packaging type is recorded on every shipment, and shipment reports carry dimensions and packaging.
Improved
Carrier settings say what is actually saved, and adding a carrier asks which clients it is for.
Country and province are searchable dropdowns.
Bin pickers are searchable everywhere and answer a scanner.
Fixed
Product weights pulled from a store were 1000 times too light.
A saved box ships at the weight it actually weighs. The container's own weight was being dropped when a pack was saved and resumed.
Dates entered as one day no longer come back as the day before.
US shipments through ShipStation return rates again.
Week of 2026-07-27 to 2026-08-02
New
A real Shipments page. Shipments now identify themselves properly: store order number, CanShip order number, destination, and the service used. There is a true Status column showing voided, manifested, or no label yet, and for ShipStation shipments it names the carrier actually carrying the parcel rather than showing the aggregator. Filter by client, date, or status, export the list to CSV, and the page refreshes itself after you void or re-pack instead of leaving you looking at stale rows.
See exactly what a product sync will do before you run it. Sync Products now opens a preflight window that dry-runs the sync and shows you the result first: every listing it found, what it matched in CanShip, and what it would create. You can include or exclude individual products, and exclusions are remembered, so junk listings stay out on every future sync. If a listing has a blank or duplicated SKU you can match it to the right CanShip product by hand from the same window.
Your catalog keeps itself tidy. CanShip now listens for product create and update events from Shopify, so new listings link themselves and changed listings heal their own links. Products that were created in CanShip before you connected the store used to be invisible to sync forever; they now get adopted automatically.
Turn a junk product into a SKU mapping. When a listing turns out to be a variant of something you already stock rather than a product in its own right, you can convert it: CanShip archives the stray product, records the mapping, and rebuilds its open orders against the real product.
Archive a product. Products that have history cannot simply be deleted without losing that history, so the edit screen now offers Archive instead, and the delete dialog falls back to archiving when deletion is not safe.
Inventory sync-back for bundles. If a Shopify listing is mapped to a bundle of CanShip products, the availability pushed back to Shopify is now the minimum across the components, so you cannot oversell a bundle because one part ran out.
Duplicate SKUs across listings are surfaced instead of silently merged. When several Shopify variants resolve to a single CanShip product, CanShip now reports the collision rather than quietly folding them together, and blank SKUs are flagged. Collided variants are kept separate by default, and the choice you make is recorded per variant so the decision sticks. Channel orders are now matched by variant id first rather than by SKU, because a SKU was never a reliable identity for a listing.
Clients are recognisable at a glance. Creating a client now captures address, contact name, email, phone, and website, and pulls the site favicon automatically. Every client gets its own consistent colour, and a shared client badge appears across the app, so in a multi-client warehouse you can tell whose order, product, or shipment you are looking at without reading the fine print.
Search and export on every list. Products, SKU Mappings, and Inventory now share one consistent search box, and Inventory gained a CSV export to match the others.
The app tells you when a new version is available. After a deploy you get a refresh prompt rather than a stale page, and a page that fails to load a chunk after an update now recovers itself instead of breaking.
Shipping labels carry the client's name. The ship-from sender on a label now uses the client the order belongs to, falling back to your CanShip company name. Your clients' customers see the brand they bought from.
Improved
One Sync menu on each Shopify store row. The Channels page had grown a button per feature. Product, inventory, and order syncing now sit together under a single Sync menu.
Fewer false alarms from Shopify order updates. CanShip now checks whether an incoming order update actually changed anything material. Fulfillment echoes of our own writes are ignored; genuine changes such as an address edit are escalated properly.
Bins free themselves when an order ships. Completing a shipment releases the packing bin server-side, so bin labels stop accumulating as stale.
Clearer finish to a pick job. Mark Job Complete is now replaced by the Next Job button once the job is done, instead of both being on screen.
A warehouse must have an address. Creating a warehouse now requires one, because a missing ship-from address only reveals itself later as a failed label.
Layout and readability fixes across the app. The Orders table no longer overflows the window and clip its right columns, grid cells align vertically instead of floating to the top, the Integrations Health cards no longer overlap, and the default warehouse on Channels displays the value that is actually saved.
Fixed
Dialogs now respect the client you have selected. New Product, New Mapping, Adjust Inventory, and the New Channel dialogs all ignored the client filter set in the header, making you pick the client again every time. All four now inherit it.
The Products page no longer crashes. A bad import shipped to production and broke the page on load. Fixed.
Not-found responses are honest again. An API request for something that does not exist was being answered with the app page and a success status, which surfaced in the UI as an unreadable parse error rather than a clear message. This affected every not-found path in the product, not one dialog.
Sync and allocation errors. Sync Inventory no longer fails when a product has more than one channel row for a warehouse. The inventory-sync preflight no longer spins forever fetching Shopify locations. The allocation picker no longer reports no sellable stock immediately after a successful allocation, and re-allocating from the same bin now behaves the way the screen implies rather than replacing the quantity. Convert to Mapping no longer errors on save.
Packing scans resolve to the right order. If a bin label had been reused, scanning it could open the wrong order. Scans now prefer the order actively in that bin.
Reprocessing an order after a product sync no longer double-counts. It was adding existing line items a second time and allocating against orders that had already shipped.
Smaller fixes. Creating a pick job no longer reports the same orders as both added and skipped, and the product picker in New Mapping now searches your whole catalog rather than the first fifty products.
Week of 2026-07-20 to 2026-07-26
New
ShipStation is now a carrier in CanShip. Rate shop, buy labels, void, and track through ShipStation, which brings Canada Post, Canpar, Purolator, FedEx, DHL Express, UPS, and GlobalPost with it under one balance. The label records which carrier is actually carrying the parcel, and that name is what gets written back to Shopify, so your customer sees UPS or Canada Post rather than Other.
Fixed
Canpar labels open again. Canpar labels were failing with a PDF error instead of opening.
Fulfillments push to Shopify again. The app had never asked Shopify for the permission it needed to write fulfillments, so the push was being refused.
Saving a packing weight no longer errors. A weight computed automatically to a fraction would fail to save.
Week of 2026-07-13 to 2026-07-19
New
Canpar support. Canpar joins the carrier list, configured like any other account, and is live with real labels.
Re-pack a voided shipment in one click. Voiding a label used to leave the order stranded. There is now a direct route back into the Pack flow to reprint.
Stranded tracking numbers get re-sent automatically. A scheduled sweep looks for shipments whose tracking never reached the sales channel and pushes them again, so a single failure no longer means a customer never gets their tracking.
Improved
Receiving matches SKUs whatever the case. Scanning or typing a SKU in Receiving is no longer case sensitive.
Fixed
Marking an order shipped by hand now sends the tracking. Manual mark-as-shipped was never pushing tracking to the sales channel, so those customers were never notified.
Closing the end-of-day manifest no longer errors. This affected every carrier.
Moving a single item no longer reports a missing location. Single moves were failing with a location-not-found error even when the location existed.
Week of 2026-07-06 to 2026-07-12
New
Import and export your products as CSV. Round-trippable, so you can export, edit in a spreadsheet, and import back. An import that matches an existing SKU updates that product rather than failing.
Improved
Extensiv Integration Manager inbound orders confirmed. The first real order came through the Integration Manager connection and imported correctly, and the payload shape is now locked so it stays that way.
Clearer errors when a Shopify connection is half finished. Connecting a store and not completing it used to leave a confusing state; the error now explains what happened.
Reports respect client scope. Tightened so a report cannot return data outside the client you are looking at.
Week of 2026-06-29 to 2026-07-05
New
Sync inventory on demand. Each Shopify channel now has a manual Sync Inventory trigger. Turning inventory sync on also enqueues everything in bulk, which covers stock that existed before you connected the channel and so had never produced an update for us to react to.
Fixed
A paused Extensiv connection recovers on its own. Repeated failures could trip a channel's poller and leave it stopped until someone reset it by hand. It now resets itself as soon as a poll succeeds.
The inventory-sync location picker works. The app had not asked Shopify for permission to read locations, so the picker was being refused.
Assorted errors. The backfill list and product sync no longer error, duplicate channel names are prevented, and pick jobs no longer skip labels unexpectedly.
Week of 2026-06-22 to 2026-06-28
New
Lot and expiry tracking. Turn on lot tracking for any product and CanShip captures a lot number and expiry date when you receive it. Lots and expiry dates show on the inventory list with an "Expired" or "Expiring soon" flag, and the lot that actually ships is recorded on the order, and credited back to the exact lot if you void the label. A safety rule keeps two different lots of the same product out of the same location, and a new Expiry report shows what is expired, expiring, or fine, with a CSV export. It is off by default, so nothing changes for products you do not flag.
Move inventory in bulk. The Move Inventory page now has tabs, including a bulk move, so you can relocate many items at once instead of one SKU at a time.
Run your own billing and reconciliation from the shipments export. The shipments detail export (CSV and XLSX) has been rebuilt to a clean, client-neutral set of columns, so you can run billing or reconciliation straight from the raw shipment facts. It now stamps the ship date in your company's local business date, includes voided labels (clearly flagged), adds units, weight, currency, and the full ship-to address, and manual orders no longer export with a blank order reference.
Improved
Receiving takes fewer taps. When you receive stock, CanShip now pre-selects the location that already holds that product, and the damage-photo button is clearer.
Cleaner separation between warehouses. In multi-warehouse setups, orders, inventory, and assignments stay scoped to the right warehouse, so activity in one building does not affect another.
Extensiv connections handle shipping methods and cancellations better. For Extensiv (Integration Manager) channels, the shipping method maps across more reliably and order cancellations now flow through cleanly.
Fixed
Your default warehouse now sticks on the Channels page. The default-warehouse choice for Amazon and Extensiv channels was not saving between visits. It now persists.
Week of 2026-06-15 to 2026-06-21
New
Run multiple warehouses, with per-warehouse ship-from and order re-assignment. CanShip now supports more than one warehouse, each with its own ship-from address. Move an order from one warehouse to another when you need to, and pick jobs stay scoped to a single warehouse, so a picker only sees the orders for the building they are in.
Move orders between warehouses in bulk. The Orders Actions menu now includes Re-assign to Warehouse, so you can move many CanShip orders to a different warehouse at once. You get a summary of how many moved, with a clear reason for any that were skipped (for example, an order with an active label or one already in a pick job).
Improved
Choose the warehouse when you start a pick job. Creating a pick job now asks which warehouse first, so the job is built against the right location from the start.
Pick jobs explain why an order was skipped. If an order is left out of a pick job (for example, it belongs to a different warehouse), CanShip now tells you the reason instead of quietly dropping it.
Shopify orders show their assigned CanShip warehouse. Orders routed to CanShip from Shopify now display which CanShip warehouse they belong to, and allocation is scoped to that warehouse.
Products re-sync automatically when you register CanShip locations in Shopify. Registering your CanShip locations in Shopify now triggers a product re-sync, so your catalog lines up without a manual step.
Re-assigning a warehouse moves the Shopify fulfillment order with it. When you move a Shopify order to a different warehouse, its Shopify fulfillment order moves too, so CanShip and Shopify stay in agreement on where the order ships from.
Carriers that cannot ship from a warehouse's country are now hidden. Rate shopping leaves out carriers that cannot originate from the country of the warehouse an order is assigned to, so a Canada-only carrier no longer shows up, or gets picked by mistake, for a US warehouse.
Inventory sync settings understand multiple warehouses. The inventory sync controls now account for multi-warehouse setups and show sync health for each warehouse.
A "Routing not set" warning when a store is not sending orders to CanShip. If a connected store has orders that were not routed to CanShip because its order routing was never pointed at your CanShip location, a "Routing not set" chip now appears on the store's card so you can catch and fix it.
Split orders are clearer, and you can consolidate them. Orders that span more than one warehouse now show plain-language labels in the Orders grid, and a "Multiple (split)" order offers a "Re-assign to one warehouse" action to bring it back to a single location.
The Re-assign button now explains when it is unavailable. When re-assigning is not allowed for an order, the button shows as disabled with a tooltip explaining why, instead of disappearing. In-app notifications also replaced the old browser pop-up alerts.
Fixed
CanShip Locations dialog remembers your saved warehouses. Reopening the Locations dialog now pre-checks the warehouses you already saved.
Turning off sync for a product now stops all of its warehouses. Previously, switching off inventory sync for a product paused only one of its warehouses while the others kept pushing stock, which could oversell. The toggle now stops every warehouse for that product.
The missing-address warning now shows when registering a warehouse without one. Registering a warehouse that has no address now correctly warns that the Shopify location will inherit the shop's country, so you do not accidentally mis-route shipments.
A required state or province is no longer cleared on the ship-from address. Applying a warehouse ship-from no longer blanks a required state or province when the warehouse record leaves it out, so US shipments keep a valid state.
Fixed missing products and order allocation issues. Resolved a problem that could leave products missing and orders unallocated.
Week of 2026-06-08 to 2026-06-14
Improved
Extensiv connections are more resilient. A per-channel safeguard now pauses a misbehaving Extensiv connection on its own instead of letting it churn, so one problem channel cannot disrupt order pulls on your others.
Integrations
Canpar improvements. A round of fixes and updates to Canpar label creation and rating for accounts shipping with Canpar.
Week of 2026-06-01 to 2026-06-07
New
Manual shipments capture local pickup details. When you mark an order as shipped outside the standard pick-and-pack flow, you can now record local pickup as the shipment option and capture the details that go with it, so the order history reflects what actually happened. Pairs with the manual mark-shipped action introduced earlier in May.
Set non-delivery handling instructions. Tell the carrier what to do if a shipment cannot be delivered (return to sender, hold for pickup), captured per shipment so the instruction travels with the order.
Improved
Mark a single order shipped from the bulk menu. If you have exactly one order selected on the Orders page, the bulk menu now lets you mark it shipped with a tracking number directly, without switching to a separate single-order action. Saves a click when you are closing out one-off orders.
Source and cart order ID shown in the order modal. Opening an order now shows the original source-platform reference (the Shopify, Amazon, or Extensiv order number) alongside the per-company Order ID. Easier to cross-reference with a customer email or a screenshot from the source store.
Edit or remove line items on an order. You can now adjust or remove individual line items directly from the order edit screen.
Rates and the Ship button stay hidden until the shipment is error-free. The rate options and the Ship action only appear once every problem on a shipment is resolved, so you cannot try to ship an order that still has an unresolved error.
Clearer product-sync errors on the Channels page. When a sales channel's product catalog sync fails, the channel now shows the specific error instead of failing quietly.
Order and edit screen refinements. A round of usability tweaks across the order page and the edit screen.
Missing-line-item handling tightened further. A follow-up round of fixes to how CanShip handles orders that arrive with line items it cannot resolve cleanly. Reduces the number of orders that need manual intervention.
Fixed
Canada Post errors now surface clearly. When a Canada Post request fails, the real reason now shows instead of a generic failure, and an XML formatting issue that caused some Canada Post labels to fail is resolved.
Weight save and weight entry fixes. A couple of bugs around saving and entering shipment weight are fixed.
Zonos US shipments follow-up fix. An additional fix to US-bound shipments routed through Zonos.
Mark-as-shipped bug. A bug introduced alongside the new manual mark-shipped flow is resolved.
Blank client name on some screens. A display fix where the client name was rendering empty on shipment and order screens.
Carrier label UI polish. A round of small visual corrections on the carrier label screen.
Week of 2026-05-25 to 2026-05-31
New
Country of origin on products. Set the country of origin per product so cross-border shipments declare it correctly to the carrier. Used on US-bound Canada Post and on customs paperwork generally.
Improved
Shopify routing now respects your fulfillment location. CanShip only ingests orders that Shopify has assigned to your CanShip fulfillment location. If you run multiple fulfillment locations in Shopify (a separate warehouse, your own pick-and-pack, a drop-shipper), orders going to those other locations stay where Shopify routed them. Set your routing in Shopify and CanShip follows.
Extensiv connections now pull orders on a regular cadence. Some Extensiv connections were not receiving webhook deliveries, so orders arrived late or not at all. CanShip now pulls from Extensiv's Integration Manager directly on a schedule, so new orders land reliably without depending on webhook delivery.
Set the polling interval per Extensiv channel. If you want a faster cadence on a high-volume Extensiv channel or a slower one on a quiet channel, the timing is now configurable per channel.
Product sync for Extensiv and CartRover channels. When you connect an Extensiv or CartRover channel, CanShip can pull the product catalog along with the orders, so SKUs match what's on the shelf without a separate manual mapping step.
Fixed
US-bound Canada Post shipments via Zonos process cleanly. Several customs fields that were sometimes missing on the Canada Post XML are now always included. US-bound orders that previously bounced at the rate-shop or label step are processing through without the workaround.
Saved carrier credentials now clearly show they were kept. Saving a Zonos API key (or any sensitive carrier credential) was persisting correctly, but a hidden "leave blank to keep current" hint made it look like the key was lost. The hint is now visible.
Missing-product and missing-line-item handling. Order ingestion is more resilient when an incoming line item references a SKU CanShip doesn't recognize, with clearer signals so you can spot which products need mapping.
Week of 2026-05-18 to 2026-05-24
Improved
Global client filter in the header. A new client picker in the top bar scopes every list page (Orders, Inventory, Products, Shipments, Receipts, SKU Mappings, Channels, and all reports) to a single client at once. Switch back to "All clients" to widen out. The filter clears automatically when you switch company or log out.
Per-company Order IDs. Orders now show a per-company sequential Order ID instead of the previous global database row number. Existing orders were backfilled, so every order in the history has a clean per-company number. New orders pick up the next number in your company's sequence as they come in.
New "Ordered" column on the Orders grid. See the original order-creation timestamp from the source platform (Shopify, Amazon, or Extensiv) directly on the grid. Sort or filter by when the customer actually placed the order, not just when CanShip ingested it.
Set a custom Order ID on manual orders. When you create an order by hand, you can now type your own reference number. Manual orders get tagged with a wrench icon plus a "Source #1234" tooltip so they stand out in the grid.
Rename a connected channel. Connected Shopify, Amazon, and Extensiv channels can now be renamed from the Channels page. If you delete a channel, its name becomes available again for a new connection.
Sidebar collapses to an accordion. The left-side navigation now keeps only the group you're working in open, so the menu stays compact as more pages get added. Manually expand any group to keep it open while you navigate within it.
Clients listed alphabetically everywhere. Every client list across the app now sorts A to Z by default.
Fixed
HS code validation now accepts the standard 10-digit format. Customs HS codes (the harmonized commodity codes used on cross-border shipments) were rejecting some valid entries. Now the validator accepts the standard format used by CBSA and CBP, so cross-border products import and sync without the validation error.
CSV inventory imports and mobile receive scans no longer break on the first unknown SKU. A products-lookup endpoint was returning a 404 on no-match, which the browser then treated as a hard error and stopped the whole import. Unknown SKUs are now reported per row, so you can spot them in the results and fix the source file without losing the rest of the upload.
Sidebar groups stay expanded between page renders. A follow-up fix to the new sidebar accordion. Manually expanded groups no longer collapse on every render. They stay open until you navigate to a page in a different group.
Delete-product 500. A bug that returned an internal server error when deleting certain products is fixed.
Image upload glitch on product photos. A bug that intermittently failed product-photo uploads is fixed.
Week of 2026-05-11 to 2026-05-17
Improved
Every list page is now a sortable, filterable data grid. Orders, shipments, inventory, products, clients, and locations all use the same upgraded table style. Click any column header to sort, drag column edges to resize, and use the filter row to narrow a long list without leaving the page.
Mark an order shipped manually from the Orders page. A new manual mark-shipped action on the Orders page, for the cases where a shipment happened outside CanShip (a hand-carried order, a client pickup, a backdated shipment) and you just need the order to reflect that without re-running it through pick and pack. Comes alongside a round of smaller Orders-page usability refinements.
Packing station polish. A round of quality-of-life refinements to the packing workflow.
Order allocation page upgrades. Country fields now show inline on each shipment so you can spot cross-border orders without clicking in. Locations holding overstock get a chip so you know at a glance which stock pool a line came from. Row tints surface the allocation state per line. Together, these make a long allocation review pass noticeably faster.
Delete draft shipments. A new delete button on draft shipments lets you clean up the list when a draft was created in error, without going through the full cancel-and-void path.
Client name on the channels list. Each connected channel now displays which client it belongs to right on the Channels page, no click-in needed. Makes managing the channel list easier as you add more clients.
Integrations
Canada Post label and end-of-day manifest fixes. Several edge cases around label generation and end-of-day shipping summaries now process cleanly, including a fix for shipments that previously left the manifest page in an inconsistent state.
Fixed
Allocation accuracy in edge cases. Two underlying allocation issues were addressed. Orders now allocate predictably when inventory updates overlap with active orders.
Warehouse name now displays correctly on confirmation screens. A display fix on a few screens where the warehouse name was missing from the confirmation step.
Week of 2026-05-04 to 2026-05-10
New
Three new Canadian domestic carriers: UniUni, CanPar, and Purolator. Connect any of these alongside your existing carrier mix and print labels from inside CanShip the same way you do for Canada Post or FedEx. Currently rolling out to early-access accounts to confirm real-world volume behaviour, ask if you want to be on the list.
ShipWizmo as a carrier option. If you already ship through ShipWizmo, you can now connect your account directly to CanShip and book labels through their carrier mix without leaving the app.
Bulk-import products, locations, and starting inventory from a CSV. Open the import dialog on any of these three pages, pick a CSV file, preview the first 50 rows to make sure the columns look right, then commit. Inventory imports add to your existing on-hand counts rather than replacing them, so running a starting-stock import on top of live data is safe. After the run, the success and error counts show inline, so you can spot any rows that didn't take and fix the source file before re-running.
Integrations
Extensiv connections moved to Integration Manager. If you use Extensiv as an order source, the connection now runs through Extensiv's Integration Manager (the cart-routing product) instead of 3PL Warehouse Manager. Each connection uses your own Integration Manager credentials, generated in your IM dashboard, so every connected merchant brings their own key. Tracking updates and cancellations push back through Integration Manager automatically. Existing Extensiv channels need to reconnect once with the new credentials. The old admin "browse Extensiv orders" pages are gone, Integration Manager is webhook-driven by design.
Map your Amazon listings to the right warehouse SKUs. If your Amazon listing SKU doesn't match what's actually on the shelf, or if one Amazon listing represents a bundle of several products, you can now tell CanShip how to translate. No renaming on the Amazon side.
Week of 2026-04-27 to 2026-05-03
New
Public status page. Check status.canship.co any time to see if everything's running, plus 90 days of uptime history. Linked from the footer of every page.
Integrations
Address fixes from Shopify update orders automatically. When a customer corrects their shipping address in Shopify before you've started picking, CanShip applies the change right away. If picking has already started or a label is printed, the system flags it as a warning instead of changing things mid-flow, so your team isn't shipping to a stale address.
Week of 2026-04-20 to 2026-04-26
A heavy week for big customer features.
New
Pull in your past Shopify and Amazon orders. A guided import that handles orders placed before you connected your store to CanShip. You can preview what will be imported before anything writes to your data. The import won't accidentally pull inventory away from your live orders unless you explicitly turn that on. Live progress shown in a per-job dashboard.
Your Shopify store's inventory updates automatically. When stock changes in CanShip (a shipment goes out, a return comes in, you adjust a count), your Shopify storefront shows the new number within about 15 seconds. Turn it on per channel, exclude specific products if you don't want them updated, and we'll alert ops if anything looks off. Built specifically to stop the "last 3 units on Black Friday" oversell scenario.
CanShip shows up as a fulfillment location inside Shopify. When you connect your store, Shopify recognizes CanShip as a place to send orders. Orders routed to us appear with an "Assigned to CanShip" tag right inside Shopify's Orders list. Use Shopify's own routing rules to decide which orders come our way.
"Sync recent orders" button per Shopify channel. Click it to pull in any new orders right away instead of waiting for the next automatic update.
Improved
Connected Shopify channels page redesigned end to end. Clearer confirmation dialogs and helpful messages when there's nothing to show yet. Better error messages when a shipping label can't be printed. Pick jobs can now be assigned to a specific picker.
Week of 2026-04-13 to 2026-04-19
New
Returns workflow. Process customer returns through a dedicated screen, with a built-in returns report you can pull at any time.
Receiving on a phone. Workers scan items in on a phone, snap photos of any damage right at the line, and toggle "Receive to hold" for items that need quarantine. Even if the phone sleeps mid-shift, no scans get lost.
End-of-day Canada Post drop-off. Generate the day's shipping summary that Canada Post needs when they pick up your packages. Past days stay accessible, you can download them as PDFs, and you can redo a day if something needs to change.
Integrations Health dashboard. See at a glance how your connected stores and carriers are doing. Pending and failed updates, retry buttons for orders that didn't go through, Amazon sync status per channel, and a list of the most recent errors so you can spot patterns.
Theme picker in My Settings. Including a MacOS7 retro theme, several accessibility-first themes, and updates to the existing ones.
Pick-without-bin option for warehouses that don't use bin labels. The setting is captured when each pick job is created, so flipping the toggle mid-shift won't disrupt jobs already in progress.
Improved
Clearer error messages when a carrier rejects a shipping label, so you know exactly what's wrong. FleetOptics now falls back to the shipment's overall dimensions and weight when individual items don't have them set. Unit labels (cm, in, kg, lb) now show on dimension and weight fields. Cancelling the New Order screen no longer leaves a half-built draft hanging around. Two of your clients can stock products with the same barcode (GTIN). Delete a product directly from the products page.
Week of 2026-04-06 to 2026-04-12
A big integrations week. Amazon and Extensiv become first-class order sources, UPS and FedEx join the carrier mix, US shipping via Zonos goes live, and running multiple companies from one login.
New
Inventory automatically reserved against new orders. As orders come in from Shopify, Amazon, and Extensiv, CanShip pulls inventory from your pickable, sellable locations first (oldest stock by location order), and falls back to overstock if needed. Toggle this per channel, or run a bulk allocate from the orders list any time.
Carrier accounts. Add and manage your carrier credentials in CanShip. Override credentials per client when you need to, and choose which carriers each client is allowed to use.
UPS and FedEx are now supported as carriers. Connect your accounts in a few clicks.
Zonos for US-bound Canada Post shipments. Pre-pay duties, declare customs with HS codes per item, and the system flags any shipment missing required customs info before you try to ship it.
SKU aliases and bundles. Tell CanShip when an incoming SKU is just a different name for one of your products (alias), or when it represents multiple products with specific quantities (bundle). Applies to orders from Shopify, Amazon, and Extensiv.
Run multiple companies from one login. Switch between companies in the header, and CanShip applies each company's logo and header colors as you move between them.
Invite clients to view their own data. Read-only accounts scoped to specific clients, so they can check on their inventory and orders without changing anything.
Reports and audit trail. Shipping costs broken down by client and carrier, pick-and-pack throughput, inventory snapshots, order volume over time, and a full inventory history searchable by SKU.
Mark locations as sellable or pickable. Keep returns and QC stock out of your sellable counts, and keep overstock out of pickers' way until you're ready to use it.
Sales channels can now be archived when you stop using them, without losing the order history.
Integrations
Tracking numbers go back to Shopify automatically. When you print a label, Shopify gets the tracking. When you void a label, Shopify cancels the fulfillment too.
Tracking numbers go back to Amazon automatically.
Tracking numbers go back to Extensiv automatically.
Amazon and Extensiv IM are full order sources alongside Shopify. Each integration has its own real-time pickup of new orders, processing into CanShip, and tracking-back to the source.
Week of 2026-03-30 to 2026-04-05
New
Receipts now have a real lifecycle: open, confirmed, voided, or cancelled. Confirming can put items directly on hold. Voiding cleanly releases its own holds before re-checking what's available, so a "received-to-hold" line can't accidentally block its own void.
Integrations
Orders pull from Shopify in real time. Verified, deduplicated, and reprocessed automatically if any orders came in before products had fully synced.
Week of 2026-03-23 to 2026-03-29
The pick-and-pack sprint. Warehouse operators got a fully functional, mobile-friendly workflow.
New
Order statuses (open, ready, cancelled, shipped). Each status moves to the next in a controlled order, with checks to prevent accidental cancellations.
Pick jobs. Group orders together for one picker to handle. Adding orders to an existing job only works if the job hasn't started yet.
Mobile-friendly pick screen. Confirm the location, scan items as you go, scan the bin to confirm each order, and a "Can't find" button that logs the issue for follow-up.
Packing station. Pack into multiple boxes per order, split quantities across boxes, ship each box independently, and print all the labels at the end of a packing session.
Dashboard with the numbers that matter. Orders by status, allocation health, pick jobs in progress, bins ready to pack, units shipped today, oldest open order, and when the last label printed.
Improved
Label creation moved off the order page and into the packing station, where it belongs.
Week of 2026-03-16 to 2026-03-22
New
Inventory as a first-class part of the system. Receive, adjust, list, and move stock. Inventory reserved automatically against orders. On-hold and release. When you void a shipping label, both the carrier label and the inventory get cleaned up at the same time.
Earlier (October 2025 to February 2026): the foundation
The first four months of CanShip built the foundation. Warehouse locations, products and clients setup, comparing carrier rates side by side, label reprints, a shipments page, and the first orders flowing in from a real store. Week-by-week customer-visible changes start with the inventory and pick-and-pack work in March 2026.
Want product updates as they ship?
Follow @CanShipApp on X for weekly highlights, or subscribe to the system-status feed at status.canship.co for incident notifications.